5 CM Collections You’ll Love to Use with the Textile Collection

Yesterday, we launched the new Textile Timber, Stone and Cloth Paper Packs, and while they make stunning layouts by themselves, you’re not going to believe how awesome they work making stunning scrapbook layouts paired with other CM collections! We’ve compiled five of our favourites for you today. Intrigued?


Copy of Full Bloom Customer Email (10)


#1 – Cloth + Timber + Full Bloom

textures with full bloom

What You’ll Need:

page -3b

Instructions:

  1. Start with a full sheet of Royal Blue Cardstock. Adhere a 12″ x 3-1/2″ inch strip of “striped” Textile paper to the top of the cardstock.
  2. Mat two 6″ x 4″ photos with Full Bloom Mats and “quilt” Cloth paper trimmed to 4-3/4″ x 6-3/4″, adhere at the top of the layout.
  3. Cut a 12″ x 6″ strip of “blue” timber paper and punch along one edge with the Scallop Dot Border Maker Cartridge, adhere at the bottom of the layout (overlapping one photo.)
  4. Mat four 2-1/2″ x 4″ photos with “quilt” paper trimmed to 2-3/4″ x 4-1/4″, adhere photos evenly spaced across the bottom of the layout.
  5. Trim a 12″ x  1″ strip of “striped” paper and adhere across the bottom of the layout. Add stickers and journaling.

page -3a

#2 – Cloth + Stone +Full Bloom + Archiver’s™ 

textures with archivers full bloomWhat You’ll Need:

page-2b

Instructions:

  1. Start with a full sheet of Evergreen Cardstock. Adhere a 12″ x 5-1/4″ inch strip of “pebble” paper to the left of the cardstock.
  2. Mat two 6″ x 4″ photos with”dark wool” paper trimmed to 6-1/4″ x 4-1/4″ and Full Bloom Mats, adhere on the right side of the layout.
  3. Mat two 3″ x 3-1/2″ photos with “dark wool” paper trimmed to 3-1/4″ x 3-3/4″, adhere photos on the left side, approximately 1/2″ away from the left and bottom edge of the layout.
  4. Adhere a Laser Cut Border on the right side of the small photos with Repositionable Tape Runner.
  5. Trim a 12″ x  1″ strip of “diagonal striped” paper, adhere another Laser Cut Border, half-on-half-off this strip using Repositionable Tape.
  6. Add Foam Squares to the back of the 1″ strip and place it in line with the edge of the “pebble” paper. Add stickers and journaling.

page-2a

#3 – Timber + Stone + Bee Mine

textures and bee mine

What You’ll Need:

page-4b

Instructions:

  1. Start with a full sheet of Gold Shimmer Cardstock.
  2. Punch 2 “light marble” paper and “dark wood” paper Teardrop Lattice Borders.
  3. Using Repositionable Tape Runner, adhere 2 of the Teardrop Lattice Borders overlapped at the top of the page and 2 not overlapped at the bottom of the page.
  4. Trim a 12″ x 7-1/2″ strip of “light wood” paper and adhere overlapped with the top borders.
  5. Mat a 4″ x 6″ photo with “light marble” paper trimmed to 4-1/2″ x 6-1/2″ and “dark wood” paper trimmed to 5″ x 7″, adhere to the left side of the layout.
  6. Add stickers, some with Foam Squares (double-stacking some for extra height), some without and your journaling.

page-4a

#4 – Timber + Stone + Fur Buddies + Countryside Comfort

textures and fur buddiesWhat You’ll Need:

page-1b

Instructions:

  1. Start with a full sheet of “striped” Fur Buddies paper. Trim two 12″ x 3/4″ strips of “cobblestone” Stone paper and adhere to the top and bottom of the layout.
  2. Trim a 6-1/2″-10-1/2″ strip and 4-1/2″ x 10-1/2″ strip of “yellow” Fur Buddies paper, adhere these onto the “striped” paper.
  3. Punch a border of “cobblestone” paper with the Arrow Border Maker Cartridge and trim the border to 1-1/4″, place this approximately 1-1/2″ from the bottom of the page.
  4. Mat two 6″ x 3″ photos with “white wood” paper trimmed to 6-1/4″ x 3-1/4″ and one 6″ x 3-1/4″ photos with “white wood” paper trimmed to 6-1/4″ x 3-1/2″, adhere to the left side of the layout with Foam Squares.
  5. Mat on 4″ x 6″ photo with “white wood” paper trimmed to 4-1/4″ x 6-1/4″ and adhere to the right side with Foam Squares.
  6. Trim a 5″ x 1-1/2″ strip of “grid” Fur Buddies paper and snip one end with scissors into a flag, place one end under the bottom left photo just above the arrow border.
  7. Finally, decorate with a few of the arrow shapes and Everyday Sentiments, then add your journaling.

page-1a

#5 – Timber + Stone + Countryside Comfort + Gallivant

textures and gallivant ccWhat You’ll Need:

page-5b

Instructions:

  1. Start with a full sheet of “sandstone” paper. Trim a 12″ x 1-1/2″ strip of “dark wood” paper and adhere to the bottom of the layout.
  2. Trim a 12″ x 5-1/2″ strip “yellow” Countryside Comfort paper, adhere just above the “dark wood” paper strip.
  3. Punch a border of “green” Gallivant paper with the Chevron Border Maker Cartridge and trim the border to 1-1/4″, place this overlapping the Timber and Countryside Comfort papers at the bottom of the page.
  4. Punch another border of “green” Gallivant paper with the Chevron Border Maker Cartridge, this time only punching in 2 places and trim the border to 1-1/4″. Adhere this approximately 1-1/4″ from the top of the page.
  5. Double-mat two 6″ x 4″ photos with “yellow” Countryside Comfort paper trimmed to 4-1/2″ x 6-1/6″ and “dark wood” paper trimmed to 5″ x 7″.
  6. Adhere the photos with Foam Squares in the centre of the page, slightly overlapping the top green border.
  7. Add Gallivant Embellishments with Foam Squares and your journaling.

Page-5a

Basic Supplies needed to create all the layouts above:

So, that’s our list of 5 CM collections you can pair with the Textile collection… Comment below and tell us what products you plan to combine your Textures Paper Packs with!

 

One thought on “5 CM Collections You’ll Love to Use with the Textile Collection

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s